20,000 ppm is equivalent to a 2% concentration, meaning that approximately 2 grams of chlorine dioxide are contained in 100 ml of saline solution. You can easily produce 2 grams of chlorine dioxide gas through the reaction of sodium chlorite and acid; in fact, you can even readily produce 10 grams of chlorine dioxide gas assuming you have 20 grams of sodium chlorite. Introducing chlorine dioxide into 100 ml of saline solution requires special equipment (I have custom-made equipment for this purpose), as dissolving 2 grams of chlorine dioxide gas into 100 ml of saline solution is a complex process that requires cooling and pressurization.
Which patent? My patent? The patent does not describe these devices. The airtightness of the container storing chlorine dioxide gas during the pressurization process is crucial. I use PTFE gaskets, which are easy to buy in China, but in your country, I estimate it might be difficult. Using silicone might not work because chlorine dioxide can easily penetrate silicone.
If you must make it at home, I might need to mail you specialized equipment.
The cds(PH 3 too low for inj.) has to made with an isotonic to cell solution that is PH balanced to 7 optimally.
DIY
1. 250ML of distilled water
2. add 2.5 grams of non ionized salt. celtic
3. add 1.5 grams of bobs red mill baking soda aluminum free. Strain in unbleached filter if needed.
4. ADD PHed saline water 100ml in CDS reation jar 500ml square sealed ball jar with rubber seal and latch to seal tight.
5. add 20ml of 22,4% sodium chlorite in shot jar. Then add 20ml of citric acid for gas reaction
6. seal jar to infuse gas for 24 hrs
7. repeat steps 5-6
8. check PH of solution before use. 7 -7.5PH
be very sanitary during prep in well ventilated area
This is all theory:)
The concentration of the chlorine dioxide injection I use is 20,000 ppm, with a neutral pH.
Do you infuse the gas into pure injectable saline?
Do you add extra sodium chloride to the gas infused CDS to increase PPM to 20,000PPM.?
Pure CDS is 3 PH which is caustic to internal tissues.
Are you raising PH with baking soda?
I have reviewed the patents.
Blessings
I don't think the pH value of pure CDS is 3. What is the concentration of this CDS? Where do the hydrogen ions in the solution come from?
XL I am only aware of raising the PPM of CDS by adding extra sodium chlorite crystals into the premade CDS.
Is this how you achieve a 20,000 PPM?
Blessings
20,000 ppm is equivalent to a 2% concentration, meaning that approximately 2 grams of chlorine dioxide are contained in 100 ml of saline solution. You can easily produce 2 grams of chlorine dioxide gas through the reaction of sodium chlorite and acid; in fact, you can even readily produce 10 grams of chlorine dioxide gas assuming you have 20 grams of sodium chlorite. Introducing chlorine dioxide into 100 ml of saline solution requires special equipment (I have custom-made equipment for this purpose), as dissolving 2 grams of chlorine dioxide gas into 100 ml of saline solution is a complex process that requires cooling and pressurization.
I saw all that equipment and techniques in the patents, But I don't have any of it. How can I mimic this infusion with basic equipment??
How would you do this without the lab equipment?? DIY at home?
Which patent? My patent? The patent does not describe these devices. The airtightness of the container storing chlorine dioxide gas during the pressurization process is crucial. I use PTFE gaskets, which are easy to buy in China, but in your country, I estimate it might be difficult. Using silicone might not work because chlorine dioxide can easily penetrate silicone.
If you must make it at home, I might need to mail you specialized equipment.
Thanks
Thank you for sharing this information. Could you tell me if this is using MMS or CDS?